Die ersten Details zum neuen Flow X wurden nun freigegeben. Bestellen könnt ihr den neuen Regler, welche bereits lieferbar ist. Die ersten Details sind noch in englischer Sprache.
Following its brief introduction with the Worlds Championship Win in Beijing, LRP launches the long awaited all new top of the line Flow X TC Spec speed control to the public. As the first of an upcoming
series of class-specific Flow X ESCs, the TC spec comes with the following new main features:
• LRP’s exclusive Customized Super FETs (CSF-01) for highest power output
• Heavy duty 2.8mm 8-layer power board for minimum resistance and lowest
• IFMAR Worlds winning v4.1 software specialized for touring car racing
• Bulletproof 6V/6A BEC for the most reliable power output
• Full aluminium case in exclusive state of the art design
All new power & logic board hardware | Customized LRP cooling plates | Lowest internal core temperature | Black super flexible WorksTeam customized power
wires | Black short receiver wire | Selected hardware components | Low profile case design with improved air-flow | Easy solder system | Dust and waterproof
buttons (IP68) | v4.1 touring car onroad software for Modified and Stock classes incl. Boost 0 | Multi-mode power profile adjustment & new MPS4 protection system
Special new brakes types BDX10 and BDX20 made especially for the FLOW X for the most consistent and powerful braking in every condition | New electronic timing algorithm for smooth and yet extreme power gains | Timing delay feature for smoothest throttle control | Optimized internal adjustments of the microcontroller parameters for faster response and consistent running | Optimized Protection levels with precision temperature readout | Tested
in hardest race conditions | 100% LRP quality approved with sophisticated functional and electrical test incl. drive simulation | Order Number: 500004
LRP proudly announces the release of the long awaited IFMAR Worlds winning Flow X competition speed control. Its unique combination of hardware and software features was created to deliver maximum performance on the track without compromise for touring car racing. With this in mind, Flow X comes fully equipped to bring the best experience to the user in every racing situation.
The Flow X comes equipped with completely redesigned power board and logic board to unleash the full potential of the new software and to provide reliability for today’s extreme racing demands. With 8 copper layers and a total thickness of 2.8mm, the Flow X heavy duty power board achieves minimal resistance
and drops core temperatures significantly. First time in use are LRP’s exclusive Customized Super FETs CSF-01. To improve internal cooling further, new copper cooling plates come soldered on both PCB sides. Backed with a bulletproof 6V/6V BEC and
newly selected high quality components ensure most consistent operation under extreme loads. Finally, rounded off with pre-soldered all black 12AWG power wires, short receiver lead and astonishing new dark blue full aluminium case with aluminium
pushbuttons, the new Flow X will completely stand out and be perfectly fitted to any touring car chassis.
The Flow X TC Spec comes pre-installed with the IFMAR Worlds winning v4.1 software. Smoother driving feel with maximum power output and consistently strong brakes were the main focus points on this new software creation. All new brake types developed especially for the Flow X will match any driving style and
situation on track, while the new Torque feel, Timing and Delay features are to provide the smoothest throttle control with highest top speeds at any racing track. Timing parameters in Flow X have been completely revised and now feature exceptional improvements in terms of power delivery. To give Stock class racers the edge, the benefit from the feel of a pure LRP speed control is backed with the power board’s low resistance, ensuring most direct motor control with minimum losses.
By the time of release, LRP continues to use its well-known effective system for fast trackside adjustments with pushbuttons, with no need to use a separate programming unit. The Flow X speed control series however is designed to support external programming device which is planned to be offered later on. Combined with an all new user manual concept, the Flow X remains effective and easy to use for everybody. The Flow X TC spec is available now.
Please feel free to visit LRP online at www.lrp.cc/FlowX for latest information with manuals, tech tips, setups, tutorials and updates.
Order No. Item EAN Code UPE
500004 Flow X TC spec 4250068165951 224,99 €
Included in the package:
– Flow X TC spec ESC
– Installation manual & Software guide
– 30x30x7mm fan
– 4x short and 4x long lightweight blue alum. fan screws
– LRP sticker sheet
– 100mm Hall sensor wire
– 40x40mm double-sided tape
- Cont. Current 220A
- Peak Current up to 1800A
- Voltage Input 7.4V (2S)
- Motor Limit >2.5T
- BEC 6V/6A
- Software v4.1
- Case Size 33.7×32.6×19.8mm
- Weight 44g (excl. wires)
- Power system Sensored brushless
- Driving function Forward/Brake
- Power Wires WorksTeam 12 AWG black
Artikelbezeichnung: LRP FlowX BL Regler