Bei dem 2.Lauf zur niederländischen 1/10 nationalen Meisterschaft trafen sich die Piloten auf dem technisch anspruchsvollen Kurs in Gouda. Die Strecke bot wenig Griff und es wurden viele Setups probiert, um die Fahrzeuge bei dem schönen Wetter optimal um den Kurs fahren zu können. Am Ende siegte Julius Kolff.
Triple podium for Serpent 748 at Dutch 1:10 National round 2
The technical and twisty track of Gouda would be the setting for round 2 of the Dutch 1/10 National Championship. After the rain affected round one, it would be glorious weather this weekend.
The track surface is very smooth and low grip needing a good setup that gets you around the tight hairpins, yields good traction and is stable in the long sweepers. Not easy to get it all at the same time… On saturday Daan and myself tried some setup options on our 748 Natrixes and discussed them in the evening to get a good starting setup for raceday.
In the end we ended up running softer diff oils than normal, 500k in front and 60k in rear for me, and layed down the shocks front and read to get maximum mechanical grip. I also reduced the caster to only 1mm ahead of the upper arms and used the optional brass fron lower pivot block.
After qualifying Daan took a convincing pole with myself in second 4 seconds behind but only 0.018s ahead of Milan Holthuis in third. Interesting finals ahead.
The dutch race format gives 2, 20 minute finals that are added using a points system. So you need 2 good runs! This proved the issue for Daan, who had an engine cut at the start of the first final. I could take the lead from the tone, but had as I planned an extra fuel stop for safety I had to push the whole final as Milan stayed very close. Thanks to the quick stops of Raymond Tempelaars I managed to stay ahead and win.
The second final would be a desaster for Milan as he blew up his engine, over revving in the pit while checking gearbox issues. With Milan out before the start I just needed a 2nd place behind Daan to win overall, but again Daan would have a troubled final. That left me with an easy cruise to take my first Nationals win this year.
With Milan and Daan out of the podium spots it created a close battle for 2nd and 3rd spots. It would turn into a full Serpent podium with John Weijtboer in 2nd and Jurmin Etnel taking the last podium place.
Julius Kolff / Team Serpent
- CONRAD-OFFROAD-MASTERS in Hütschenhausen
- MAD CRUSHER VE 1:8 4WD READYSET EP
- Xray XB4 Chassis-Seitenschutz – Medium
- Modell + Technik in Stuttgart gestartet
- Tamiya-Euro-Cup in Burgstädt
- T4 ULP Alu Progressive Shock System – Set (2)
- Serpent SRX8 – 1/8 Verbrenner im Aufbaubericht – Teil 2
- TM – Zwei Top-Decks für den E4RS4
- Rocket Zhang wechselt zu Serpent
- RRX2.0 Black von MST