Spyder SRX2 HT Team Version

Die Spyder SRX2 HT Team Edition (mit hoher Traktion) wird am besten auf Strecken wie Teppich, Astro und High-Grip funktionieren.

Das Fahrzeug wurde von Billy Easton entwickelt. Mehr Details seht ihr in den Bildern und der ausführlichen englischen Version.

Englische Version

Serpent introduces the Spyder SRX2 1/10 buggy in HT Team version .

#50009

The Spyder SRX2 HT  Team edition ( high-traction)  will perform best at high traction tracks like carpet, astro and high grip clay.  

Specific specs of the SRX2 HT Team version

Narrow hard anodised lightweight aluminium 7075 T6 chassis with separate aluminium kick-up plate front bulkhead alu SRX2

  • Shock shaft fr TiN coated (2)
  • Shock shaft rr TiN coated (2)
  • Shock spring green 3,7lbs fr (2)
  • Shock spring blue 2,1lbs rr astro (2)
  • Machined shock pistons square 2-hole 1.3
  • Smooth gear-differential
  • Low, cab forward light MH body
  • Battery plate nut in aluminium (4)
Key features of the SPYDER 2wd buggy HT Team:
  • High performance race geometry
  • Carbon fibre front and rear shocktowers
  • Laydown transmission / motor design with light 3 gear transmission
  • Durable and efficient suspension front and rear
  • Highly efficient steering Ackermann
  • Big bore 12mm shocks with dual system and hard anodisied bodies and caps
  • 3 pad slipper clutch
  • Composite battery holder

As optionals  Serpent also offers the 3-gear upright, 4-gear upright and 4-gear laydown transmissions, which are easy to assemble on the same alu chassis. To basically 4 transmission all fit on the same platform.

Spyder SRx2-HT Team Features

Chassis

Ligtweigth hard coated  and laser engraved 7075 T6 aluminum chassis plate with a layout allowing for a perfect weight balance, and optimal space for the electronics, battery and servo.  The aluminium front kick-up plate is separate and angled for more clearance for racing and allow for better nose landings. ( the separate kick-up plate allows you to also mount the optional carbon chassisplate).

Transmission

3-gear laydown transmission for high traction = HT

Serpent offers some upgrade sets to fit a 3-gear upright, 4 gear upright transmission system, or a 4  gear laydown transmission as well.  All fit on the same chassis.

Shocktowers

Strong and ultra stiff carbon fibre front and rear shock towers. The shock towers have multiple shock angle positions allowing drivers to fine-tune for varying track conditions.

Shock absorbers

Dual system 12mm hard coated big bore shocks with Tin coated shockrods and hardcoated threaded bodies, a unique cap design, a superbly sealing o-ring and spacer package. The shocks can be used in bladder or emulsion setups with the hardcoated shocktops supplied. The shock-set comes with a set of machined piston 2-hole with 1.3mm holes.  Correct shock spring are included for HT use  to finetune the suspension settings.  Shock collars with inner o-rings are used on the threaded bodies to set-ride height.  The rear shocks can be mounted in front of the rear arms or at the back.

Front upper bulkhead

The front upper bulkhead is strong and supports the upper links and shock tower in the best possible way. The front section offers the option to mount a front wing and sway bar unit

Front wishbones

The  wishbones are made from a super strong composite material. The gullwing arms  to optimize the CG and pivot on 3mm captured pins on the inside and out. The arms have 2 mounting positions for shock angle and are prepared to use an optional anti-roll bar if needed.

Front and rear track rods

Spring steel front and rear track rods are mounted to durable composite captured ball joints.  The trackRods have L/R threading for easy adjustments.

Castor blocks and settings

Caster block inserts come as 0, 2.5 and 5 degree version all of which are included.  The caster blocks are very compact and strong units made from a special composite material.

Steering block and rear upright

The steering blocks fit 5x10x4 mm bearings. The rear hub uprights use a larger 5x14x4 outer bearing and 10x15x4 mm inner for ultimate lasting performance. The steering blocks and rear uprights utilize some of the best high strength materials on the market today.

Upright settings

The rear uprights allow you to adjust, the toe in from -2 to + 2 degrees by use of various inserts also included in the kit.

Steering system and Ackermann

The steering system has a reverse swinging pivot system that optimizes the efficiency through all different types of corners. Included are 3 Ackermann choices.

Wheel-axles and wheel hex.

The spring steel wheel-axles utilized 12mm hex adapter to follow current market standards. The front springs steel axle is fixed, while the rear wheel-hex is a clamping aluminum version.

Battery space mount and weight balance

The battery is mounted perfectly in the center line of the car. In case of using a Shorty-pack, it  can be moved to front or back to play with weight balance. Pieces of hard foam are supplied to do so and secure the battery in position. The carbon fibre battery-top-brace has a secure quick release system with handy twist nuts and acts as a chassis stiffener too.  The flex can be influences by using 2 small grubscrews.   When using the upright  transmission, the Shorty can also be mounted longtudinal .

Gear-Differential

The gear differential is a super compact, effective and durable unit.

Motor plate and motor guard

The laydown 3-gear motor plate is a machined aluminium; it is then anodized and machined for weight reduction.

Anti-roll bars

Anti-roll bars can be fitted on the front and rear of the car, are optional. They can be used on high grip surfaces to further adjust the cars performance

Rear transmission case

The composite rear transmission case is light and durable.  It  securely holds the motor plate, differential as well as supports the rear wing mount and rear shock tower.

Rear driveshaft system, wheel-axles

The spring steel drive shafts are thin and light, yet durable.  The spring steel wheel-axles are 5mm, light and durable, guided by the 2 different size of bearings, inner 10x14x4 mm and outer 5x13x4 mm. The driveshaft pin is fully captured to prevent any failure. These bearings are for sure to stand up the rigors of any track condition.

Rear suspension brackets and toe in

The 3mm spring steel pivot pins are held in place by the suspension bracket made from aluminum.  Inside the bracket you use inserts to set toe-in and roll center. You can adjust the toe-in from 2 to 4 degrees and adjust the anti squat from 0 to 4 degrees.

Rear suspension arms

The long and durable rear suspension arms are very tough units to withstand the rigors of the track and the hard landings.  The rear arm offers 2 options for shock position and two mounting locations for the rear anti-roll bar if needed.

Body shell and rear wing

The light and low cab-forward style body, made in top quality clear polycarbonate,  has a nice flowing line, steep front windscreen  for down force with indents in the section in front of the windscreen. The shark fin on the roof of the cabin offers not only style but stability.  The smooth body lines enhance the cars appearance and do so in style

The polycarbonate rear wing utilizes raised cuts in the sides to improve wheel clearance.

Rear wing holder

The composite rear wing holder is connected to the rear bulkhead and shock tower. It is fully adjustable from 0,2,4,6 and 8 degrees. Its fixed into place by a washers and screws.

Ballbearings

High speed sealed stainless steel ballbearings with grease.

Fastners

Hard steel , mostly allen screws, roundhead and countersunk.

Wheels

Durable white nylon flat faced wheels, specifically designed to utilize the advancements in the front and rear suspension geometry.

Body

Lightweight polycarbonate body for optimal handling,  right downforce.

The kit comes complete with light body and SRX2 wheels, full color pdf manual and exploded views, a blank and standard set-up sheet and Serpent decals.

Set-up possibilities

    • Wheelbase
    • Caster
      • Ackermann
      • Axle height Front
      • Front and rear camber
      • Front Toe-in and toe-out
      • Rear Inboard toe-in angle
      • Rear Outboard toe-in angle
      • Antisquat
      • Roll-centers
      • Ride height
      • Weight balance
      • Shocks for dampening and springs, shock angle
      • Gear ratios
      • Anti-roll bar thickness ( option)
      • Electronics placement

       

      Kit includes

      • Racing chassis
      • Clear body and rear wing
      • Front and rear wheels with 12mm hex
      • Full color manual as PDF on USB stick and decals
      • Not included: tyres/inserts/electronics

Tech-specs

  • Length: 385mm
  • Width: varies with set-up
  • Wheelbase: 281mm
  • Gear Ratio: 2.43:1
  • Weight: varies with electronics used

Designed by Billy Easton, USA

Team Serpent

Quelle: Serpent


ToniSport-Logo-Black_web , stefan_klein_kleinkram_logo , mikanews_raceshop ,LRP-Modellaushop  ,  , 


Weitere Links

Spyder SRX2 TEAM – online

Spyder SRX2 MH Aluminiumchassis – Lightweight

 

4-Gear Set für den Spyder SRX2 MH

 

 

#mikanews