Optionsteile für den A12 von Awesomatix

Es gibt neue A12 Optionsteile von Awesomatix. Dabei handelt es sich um Scheiben, eine O-Ring und leichtere Schrauben für die Befestigung der Hinterräder.

  • SCS Sphärische Kontaktscheiben
    Der Satz für sphärische Kontaktscheiben kann anstelle des OR125-O-Rings im hinteren Kugelgelenk (ST1209M) installiert werden.
    Die SS3x4-Schraube in der Batterieplatte wird daher nicht benötigt und sollte entfernt werden. Diese Kontaktscheiben verhindern vertikale Bewegungen in andere Richtungen, ermöglichen jedoch ein Schwenken und Drehen.
    Vorteile des SCS-Sets:
    – Reibungslose und gleichmäßige Bewegung, ohne dass weitere Anpassungen erforderlich sind, wie dies bei der Verwendung der SS3X4-Schraube üblich ist.
    – Keine Kratzer auf der AM1204-Chassisoberfläche.
  • OR127 1,2 x 7 mm O-Ring
    Awesomatix 1,2 x 7 mm O-Ring zur Verwendung mit dem SCS-Set.
    Der O-Ring wirkt als zusätzliche Seitenfedern von ~ 10 gf / mm, ohne jedoch die vertikale Aufhängungsrate hinten zu beeinflussen.
    Nur in Kombination mit dem SCS-Set verwenden.
  • SB3X7AL – M3x7 Leichtmetallschraube für Hinterräder x 6
    Präzisionsgefertigte 7075 T6-Schrauben zur Montage der Hinterräder am A12 Pan-Fahrzeug. Fast 3x mal leichter als die Stahlschrauben.
    Die tatsächliche Länge des Gewindes beträgt 7,3 mm. (speziell für A12-Hubs angepasst). Der Außendurchmesser des Kopfes beträgt 4,9 mm.
    Speziell für CRC / BSR / HotRace-Räder entwickelt.


Englische Version

New Awesomatix A12 option parts.
SCS Spherical Contact Shims set
The Spherical Contact Shims set can be installed in the rear ball joint (ST1209M) instead of the OR125 O-ring.
The SS3x4 screw in the Battery plate is not needed at thus and should be removed.This Contact Shims prevent vertical movement in other directions but allows swing and rotation.
Benefits of SCS set:
– smooth and consistent operation without the need of further re-adjustments like it’s normal with the SS3X4 screw use.
– no any scratching of AM1204 chassis surface.
OR127 1.2x7mm O-Ring
Optional Awesomatix 1.2x7mm O-Ring for use with SCS set.
The O-ring acts as additional ~10 gf/mm side springs but without affecting the rear vertical suspension rate.
Only use in combination with SCS set.
SB3X7AL – M3x7 Alloy Screw for Rear Wheels x 6
Precision machined 7075 T6 alloy screws to mount the rear wheels on the A12 Pan car. Almost x3 times lighter than the steel screws.
The actual length of the thread is 7,3mm. (specially adapted for A12 hubs).The actual outer diameter of the head is 4,9mm.
Special designed to fit with CRC / BSR / HotRace Wheels.
Quelle:  Awesomatix