RPM Querlenker vorn für ARRMA V8 / EXB Versionen

Von RPM kommen neue obere und untere Querelenker für die Vorderachse für die ARRMA V5 / EXB Versionen der 6S ARRMA Kraton, Outcast, Notorious, Fireteam und Talion in rot und schwarz.



Englische Version

Front A-arms for V5 / EXB versions of the 6S ARRMA Kraton, Outcast, Notorious, Fireteam & Talion

#81572            Front Left Upper & Lower A-arms – Black

#81579            Front Left Upper & Lower A-arms – Red

#81602            Front Right Upper & Lower A-arms – Black

#81609            Front Right Upper & Lower A-arms – Red

RPM Front A-arms for V5 / EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam & Outcast are an all new design. The design modifications accommodate changes made by ARRMA for V5 and EXB versions of these vehicles, although they are reverse compatible for older models (see “Version Notes”).

Our A-arms are significantly beefier than our original 6S version A-arms. Lower A-arm support beams are 30% thicker while upper A-arms are more than 22% thicker. The added thickness not only improves durability and strength, it also reduces flex. Less flex equates to more predictable suspension performance and handling.

On the lower A-arm, we added a second shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.

As for the upper A-arm, we eliminated the caster spacers. This gave us room to widen the arm at the inner hinge pin mount. The extra width creates more of an “A” shape, stabilizing the upper A-arm. A more stable A-arm improves steering and suspension performance while adding strength and durability.

All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Notorious, Fireteam & Outcast A-arms are sold as one upper and one lower in each package. One left and one right package is needed for each vehicle. Our A-arms replace the upper arms from ARRMA #330655 and the lower arms from ARRMA #330656.

Version Notes:

V5 & EXB models: Stock replacement A-arms for ARRMA #330655 and ARRMA #330656.

V4 and earlier models: Requires 1 – ARRMA #ARA713032 Shock Mount Pin & 1 – ARRMA             #ARA330645 End Cap. Replaces stock ARRMA #AR330218 & #AR330219.

Suggested Retail Price         $17.95 / (1) upper & (1) lower

Quelle: RPM und Hoega