SWorkz bringt mit dem APOLLO II Pro einen Nitro 1/8 Buggy mit Seilzugstarter Motor auf den Markt. Damit könnt ihr den Nitroduft und vorallem den Sound des Nitromotors selber erleben. Viele Features wurden von bekannten Offroadern von Sworkz übernommen und flossen bei der Entwicklung des APOLLO II PRO ein. Mit dabei im RTR Set sind u.a. ein Pistolensender, Savöx Servos und Tankflasche. Das Fahrzeug ist fertig aufgebaut und bereit zum Start.
Mit dem Fahrzeug könnte man auch in einer Hobbyklasse den Einstieg in den RC Rennsport starten. Manche Vereine bieten sowas an……
Wenn ich es richtig gelesen habe, fehlt ganz klar der Sprit, die Senderbatterien und der Empfängerakku. Ein Glühkerzenstecker solltet ihr haben und für den Akku ein Ladegerät. Werkzeug ist empfehlenswert. Wer eine Startbox hat, kann den Motor auch darüber starten, dann muss man nicht ziehen am Seilzugstarter.
Englische Version
The new APOLLO II Pro Nitro RTR 1/8th scale off-road professional ready to run buggy from SWORKz. The 1/8th APOLLO II Nitro buggy is a Pro RTR based on the pro S350 but with an updated S35-3 buggy center layout.
The APOLLO II Nitro buggy incorporates many of the race-inspired features from the S35-3 Pro Kit. This buggy provides precise feedback, a nimble and balance feel that will suit drivers of all levels. The SWORKz design team put their efforts into proper weight distribution for the APOLLO II Nitro buggy. Proper weight distribution proved to be instrumental to the setup during the testing phase of the APOLLO II Nitro buggy.
The SWORKz APOLLO II Pro Nitro RTR buggy comes standard with many high quality parts like a T7075 aluminum chassis (with the same S35-4 chassis hard coating process), front and rear shock towers. It also has S35-3 Pro Kit’s 16mm BBS Racing Shocks System, High Performance Crown and Pinion Gears and oil filled differentials providing traction and balance on multiple off-road surfaces.
The S35-3’s centre plastic BBD diff system provides better acceleration for the APOLLO II Nitro buggy. It uses the S35-3 radio tray system that gives precise throttle and braking response.
The pivot ball steering system gives the driver sharp and accurate turning feedbacks. The APOLLO II Nitro buggy comes with a race inspired base set up that is easy to drive.
The SWORKz SES-2S steering and throttle servos (with 12kg metal gears) are made by SAVOX. This RTR also includes a 2.4G Radio System.
A pre-cut painted body shell is also included.
APOLLO II Nitro Pro RTR Features:
- Quality T7075 Aluminum Main Chassis.
- Professional T7075 Front and Rear Shock Towers.
- SWORKz S35-3 BBS Race Shock System.
- High Performance CNC Machined Crown Gears and Pinion Gears.
- F/R Full CVA Drive Shafts.
- Aluminum Adjustable Front and Rear Lower Plastic Insert Toe-In System.
- Double Protection Bumper Design.
- Sealed Front and Rear Arms Design.
- Adjustable Front Upper and Lower Suspension Arm System.
- S35-3 Radio Tray System.
- S350 Falcon II Pre-painted and Pre-Cut Body Shell is included.
- Alpha 5 Posts Pull Starter Engine System.
- 2.4G Radio System (SW-T2 Radio fit for AA battery).
- SWORKz SES-2S Steering Servo (with 12kg metal gear) Made by The World Famous Brand SAVOX.
Specification:
| Length： | 530mm | ||
| Width： | 308mm | ||
| Height： | 220mm | ||
| Ground Clearance： | 65mm | ||
| Wheelbase： | 325-330mm | ||
| Track： | F:306mm /R306mm | ||
| Gear Ratio: | C:46/13T, F/R 43/13T | ||
| Weight： | 3400g |
Quelle: MW-Cars
