Von RC4WD gibt es eine Neuheit bei den Baumaschinen. Bereits vormontiert mit Hydraulik und in wenigen Minuten einsatzbereit ist der Radlader, den es im Maßstab 1/14 gibt. Die Bezeichnung: Earth Mover ZW370.
Features:
Specifications:
- CNC Machined Metal Parts
- Molded Steel Bucket
- 10 Channel 2.4Ghz Radio
- Optimized Steel Hydraulic System
- Scale Operator Station (can fit a driving figure)
- 137MM Model Special Tires
- Reliable Hydraulic Valve and Adjustable Pump
- High Pressure Nylon Hoses (OD 4.5mm , ID 2.5mm)
- Powder Coated in Orange
- Brushless System (hydraulic)
- 40A Brushless ESC with BEC
- 270KV Brushless Monster Torque Motor
- Realistic Non Functional Disk Break
- Wheel with Planetary Gearbox Built-in
- 2 Speed Full Metal Transmission (1:64 and 1:16 gear ratio)
- Realistic Full Metal Axles
- Run Time is: 30 minutes (5000 mAh Battery)
- LiPo Cutoff
- Scale: 1:14
- Length: 27.9in / 710mm
- Width: 9.84in / 250mm
- Height: 10.5in / 268mm
- Wheel Base: 9.92in / 252mm
- Maximum Bucket Height: 18.1in / 461mm
- Operating Oil Pressure: 3.50 Bar, 50.75 psi
- Maximum Bucket Up and Down Angle: 46 to 64 degrees
- Maximum Bucket Left and Right Angle: 38 degrees
- Maximum Bucket Force: 70kg / 154lbs
- Dead Weight: 16.5kg / 36.3lbs
- Total Mass Load: 32kg / 70lbs
- Theoretical Rise: 15kg (Boom Lift).Theoretical Traction: 30kg
- Hydraulic Pump: Flow 0.8 L / MIN, Rated Pressure 2.5 MPA Ultimate Pressure 5 MPA
Zur Inbetriebnahme benötigt ihr:
- 5000mAh 11.1V 50C 3S1P LiPo Akku Pack mit XT60 Plug (Maße: max. 140mm Länge, 45mm Breite und 25mm Höhe)
- passendes Ladegerät
- 4x AA Batterien
- Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)
Artikelnummer: VV-JD00069
UVP: $2199.99
Category Posts
