Neu bei AVID sind die Unterlegplatten aus Carbon mit unterschiedlichen Stärken für den Team Associated RC10B7, um das Rollcenter zu ändern.
Englische Version
The Avid B7 Front Roll Center Shims are made out of 100% carbon and are offered in this set with four thicknesses of 0.5mm, 1.0mm, 1.5mm, and 2.0mm. Lowering the front hinge pins allows the front end to roll more. This is extremely helpful for absorbing the extra energy caused by high bite tracks like carpet/astro turf/prepped clay. It can sometimes be counter-intuitive thinking why this helps, but a good way to picture the benefits, imagine your car has turnbuckles as front shock. When giving your car any steering input the car will immediately respond causing the rear to become unstable. This increase in roll helps slow all that reaction down in the front and then in the mid-corner it picks up steering.
NOTICE: Only use this tower alignment shim with the kit standoffs. You do not run this with the Avid B7 Shock Standoffs because the geometry is fixed those.
Front Roll Center Shim Details
- 100% Carbon Fiber
- Helps to keep the bulkhead from bending when using the kit plastic roll center shims.
- You will need calipers to measure because we are cheap and dumb for not marking them, but they are cheap!
- Includes (1) 0.5mm, (1) 1.0mm, (1) 1.5mm, and (1) 2.0mm Shims.
- Fits: Team Associated B7
|
AV10188 |
B7 Front Roll Center Adjustment Shims |
$8.00 |
Quelle: AVIDRC
