Inferno MP9 TKI Spec A – Detailbilder

Im letzten Jahr gab es eine „Limited Edition“ des Kyosho MP9 TKI4, welche von Chefmechaniker Mike Cradock mit den Option-Parts, die Elliot Boots bei seinem Sieg verwendete. zusammengebaut wurde.

Zum Jahresstart 2017 legt Kyosho mit dem INFERNO MP9 TKI4 SPEC A – 33007B nach. Nein, es handelt sich um kein neues Fahrzeug. Dies entspricht dem aktuellen Modell, nur das dieses von erfahrenem Fachpersonal montiert und von Yuichi Kanai überprüft wird, bevor es den Weg in den Handel findet.

Features
  • SPEC A (ARR) „ist ein halbmontierter Bausatz. Der SPEC A wurde in der Fabrik von erfahrenen Mitarbeiter montiert und sorgfältig durch den Designer Yuichi Kanai selbst überprüft, um die besteQualität zu liefern
  • Ölstoßdämpfer und Differentialgetriebe sind kritische Bereiche. Bei dem Zusammenbau wird auf große Qualität der Montage gelegt
  • kleine Details wie die Setup-Einstellungen werden genau justiert und nachgemessen
  • ausgeschnittene Karosserie bereit zum Lackieren
  • MP9 TKI4 Spec A entspricht dem 33001B MP9 TKI4 Kit
Englische Version

INFERNO MP9 TKI4 SPEC A Part Number 33007B
Assembled by skilled staff and inspected individually by Yuichi Kanai.

Special Features
◆ SPEC A(ARR)” is a semi assembled kit. SPEC A has been factory assembled by RC dedicated experienced staffs and thoroughly checked by the designer Yuuichi Kanai himself to deliver the best buggy quality
◆ Oil shocks and differential gears assembly are critical areas. Each kit is assembled by highly experienced staffs knowing how each part must come together
◆ Even small details such as ride height and alignment are strictly measured
◆ Pre-cut body shell for ready to painting.
◆ MP9 TKI4 Spec A is exactly same as 33001B MP9 TKI4 kit

Features (same spec as 33001B Inferno MP9 TKI4 KIT)
◆ Race bread premium geometry and weight distribution. Each parts are precision crafted for perfect fit
◆ 7075 high grade aluminum chassis(3mm), Shock towers(5mm) and steering knuckles.
◆ High air flow body. Tested for a long period of time to come up with the best balance and down force. Allows more acceleration and corner speed
◆ Light weight high flow wing with wickerbill(2 types included) Increase rear traction. Lighter is better but wings need to be durable as well. The perfect balanced wing.
◆ Aluminum rear hubs with adjustable suspension pin height. More adjust-ability to fine tune to various tracks
◆ High grade servo saver as standard. Allowing linear and precise steering input.
◆ Rigid wheel design allows more stability. Designed to last
◆ High quality coating on the shock body for smooth damping
◆ Wing mount with extra surface for more wing support. Low height wing mount.
◆ Heavy Duty universal Swing Shafts for front, rear and center. 3.5mm thick bullet proof shafts
◆ Smart and efficient design for the battery and receiver box. Compatible with KO switch.
◆ Smart and efficient design for the servo tray allowing precise, effective and linear linkage movement. The servo fixture design allows easy servo maintenance and replacement.
◆ Aluminum Rear Lower Suspension Holder is included as standard.
◆ Low profile air cleaner.
◆ Machined aluminum rear hub carrier. Tested and proven at major races.

TECHNICAL DATA
*Length: 490mm *Width:307mm *Height: 180mm *Wheelbase: 325mm *Tread:254mm (F/R) *Gear
Ratio: 11.7:1 *Weight: approx. 3300g

REQUIRED FOR OPERATION
*2ch TX/RX (2 servo) *Battery for TX & RX *.21 engine *Muffler & manifold * Tires
*Engine starting tools *Fuel *Plug Heat *Super glue *Paint for body

Bezugsquelle: Fachhandel, stefan_klein_kleinkram_logo und mikanews_raceshop

Quelle:Kyosho-Europe

Weitere Links