Ab in die Mitte – Zusatzgewichte für den A800MMX

Die Gewichtsverteilung ist ein wichtiger Bestandteil der allgemeinen Fahrzeugkonfiguration. Falls ihr noch mehr Gewicht benötigt, aber wohin. Ab in die Mitte damit. Dafür gibt es die neuen BW7 / BW8 und BW10 Gewichte, welche für den Anbau am Motorhalter AM177 konzipiert sind. Einfach anschrauben – fertig.


BW10 is the „long slim“ weight for the electronics side of the motormount. It will be screwed directly to the Motormount with the two included SB25x8 screws. The weight is about ~10g.
The weights on the battery side will act same time as inner battery stop. Please make sure there is enough clearance between the Spur and the Battery with your choice of Spur gears!
Motor screws are still easy to reach during the perfect shape of BW7.
BW7 (left part) and BW8 (right part) will fit on the battery side of the motormount.
They are also fixed by the included screws.
Take care, one screw each is M3 and one M2.5!
BW7 weight is ~7g. and BW8 ~8g.
Picture of installed BW10.
ESC wire need to go above/beside the weight at thus. This option part is also the reason why the „slot“ for the ESC wire is smaller as on previous AM77MM motormounts.

BW7 (left part) and BW8 (right part) will fit on the battery side of the motormount.
They are also fixed by the included screws.
Take care, one screw each is M3 and one M2.5!
BW7 weight is ~7g. and BW8 ~8g.
Englische Version

Weight placement is an important part of general car setup. But what to do if you have already a very good balance/handling and need to add more weight ? Right! Best is to add it in middle/center of the car. The new BW7 / BW8 / BW10 are the solution.
They are designed to suite the AM177 motormount and can be screwed on directly. Check the comments of the pictures for more detailed infos.

Quelle: stefan_klein_kleinkram_logo ,  www.awesomatix.com/shop, 

Weitere Links

Neue Teile für den Awesomatix A800MMX und FX

Chassisfokus Awesomatix A800MMX – MANUEL STANKOWITZ

#mikanews