XRAY XB2C’17 – Infos online

Von Xray folgt der nächste Streich. Nach dem XT2, T4’2017 und dem X12’2017 wird nun der neue 2WD Buggy vorgestellt. Jetzt sind alle Neuerungen mit Bildern online zu sehen.

fb_img_1476379128051_add xray_xb_2_2017_0002 xray_xb_2_2017_0003 xray_xb_2_2017_0004 xray_xb_2_2017_0005 xray_xb_2_2017_0006 xray_xb_2_2017_0007

Einige neue Features:

– neue Motorposition
– neues Getriebehäuse

– neues Getriebelayout
– neue Motorplatte

– neue Aufhängungsträger hinten
– neue Kolbenplatten
– verbesserte Traktion
– Verbesserte Stabilität bei hohen Geschwindigkeiten

Englische Version

New XRAY XB2C’17 Online Now

The new 1/10 off-road RC racing car XRAY XB2C’17 is now disclosed in a detailed presentation at: https://teamxray.com/xb2c/2017/en/

2017 All-new Features:

– All-new motor position
– All-new gear box
– All-new gear box gears 36T
– All-new motor plate
– All-new rear suspension holder
– All-new shock pistons
– Increased steering
– Increased traction
– Improved high-speed stability
– Improved reliability

Motor Position

To increase traction, steering and high-speed stability, the motor position was changed from left to right position. This new position achieves a different motoric moment which improves handling in most typical track conditions.

Gear Box

The lightweight, tiny gear box has a new internal design, accommodating a new 3-gear configuration as a result of the new right-side motor position.

Gear Box Gears

With the all-new right side motor position and new gear box, the internal gears of the gear box are also new. The new large 36T gear – which fits the new 3-gear configuration – is moulded from premium graphite composite to ensure maximum life, high strength, and minimal weight.

Motor Plate

The black-coated Swiss 7075 T6 aluminum motor plate has a new design to accommodate the new right-side motor position.

The motor plate holds the slipper clutch assembly as well as the gear box, and features an adjustable motor plate position. To reinforce the assembly, the motor plate is connected to the upper brace mount via a motor plate brace.

I.S.S.TM Suspension Holders

To improve reliability and strength the Swiss 7075 T6 aluminum suspension holders were reinforced and strengthened.

The aluminum suspension holders feature Integrated Suspension Settings (I.S.S.™) which allows for quick & easy suspension geometry set-up.

Using eccentric suspension bushings – which are inserted into Swiss 7075 T6 aluminum suspension blocks – as well as additional shims and turnbuckles, the XB2 suspension geometry can be completely adjusted:

• camber
• toe-in
• rear roll-center
• anti-squat
• track-width

Shock Pistons

Shock pistons are made from Delrin® and are molded using ultra-high precision moulds. All-new 2-hole pistons (1.6mm and 1.7mm holes) are now included in the set.

Bezugsquelle:Fachhandel,  mikanews_raceshopund ToniSport-Logo-Black_web , T2-Shop

Quelle: teamxray

Weitere Links

Xray – Kohlefaserchassis für den XB2

Team Xray – X12’17 Details

Xray T4’2017 – Die Neuerungen