Es gibt neue Teile von Awesomatix für ihre Fahrzeuge. 

Lest hier (Englisch):

➡ C127S-1.6 Top Deck
C127S-1.6 Top Deck for use with AM177 Motormounts.
Special Version made from 1.6mm Carbon Material.
Recommended for lower grip conditions to enhance more overall grip.
IMPORTANT NOTICE: We recommend the use of ST24S ball studs to secure the rear toe links to ensure adequate clearance between top deck screws and toe links ball studs.
Alternatively, the kit’s ST24 ball studs can be shortened/sanded down to provide the required clearance.

➡ C127SR-1.6 Top Deck
C127SR-1.6 Top Deck for use with AM177 Motormounts.
Special Version made from 1.6mm Carbon Material.
Recommended for lower grip conditions to enhance more overall grip.
This version is intended to be used in the rear of the car, as it includes a bulkhead brace which increases rear end grip.
IMPORTANT NOTICE: We recommend the use of ST24S ball studs to secure the rear toe links to ensure adequate clearance between top deck screws and toe links ball studs.
Alternatively, the kit’s ST24 ball studs can be shortened/sanded down to provide the required clearance.

➡ P03XR Arm Ball Cap x 5
Awesomatix P03XR Arm Ball Cap x 5
This version features an enlarged top opening to ensure proper clearance for the upper keyhole on AT21 models. In addition, it includes a small recess on the top lip to allow easier removal of optional Suspension Arm O-Rings (OR14V).
Successor and replacement for P03 and P03X.

➡ SPR12XR-C0.8L Rear Spring long C0.8
Awesomatix A12X Rear Spring Long C0.8 Silver. This version is 0,7mm longer, to provide bigger preload at setting of GUD (Gap Under Damper) when using AM1204XT or AM1204-WC Chassis plate in A12X car.

Quelle:  Awesomatix